Overview of electric high platform ball valve:
The electric high platform ball valve adopts a high platform design, which can be directly installed with the actuator without the need for a bracket, which provides convenience for product installation and replacement, and has the characteristics of small flow resistance and large flow capacity. The difference between the electric high platform ball valve and the ordinary ball valve with bracket is that it occupies a small space and has a compact structure. The disadvantage is that it is not resistant to high temperature, and the temperature is transmitted to the cylinder, and the rubber ring in the cylinder is easy to age. Although the ordinary ball valve and the actuator need to be installed with a bracket and a connecting shaft, the heat dissipation function is stronger. Usually, the pipeline with a high temperature usually adopts a ball valve with a bracket, which can avoid damage to the actuator due to high temperature and prolong the service life. service life.
Electric high platform ball valve features:
1. It adopts high platform ISO5211 standard design, and it can be connected and installed with the actuator without other brackets and connecting shafts. 2. It adopts silica sol precision casting, beautiful appearance, tight and reliable, good sealing performance and wide application range.
3. Anti-static function, a spring is set between the ball, valve stem and valve body, which can discharge the static electricity generated during the switching process.
4. The fluid resistance is small. The full-bore ball valve basically has no flow resistance, and the opening and closing is rapid. It only needs to rotate 90° from fully open to fully closed, and it is easy to operate.
The electric high platform flanged ball valve adopts the spring plunger type electrostatic lead-out device, so that the direct form of static passage between the ball and the valve body or the form of static passage between the ball and the valve body through the stem tube, so that the ball and the valve seat can be The static electricity generated by friction during the switching process is led to the earth through the valve body, preventing fire or explosion that may be caused by static sparks. Static electricity is an objective natural phenomenon, which can be produced in many ways, such as contact and friction. For example, for high platform ball valves, when the ball rubs against the soft-sealed switch, static electricity will be generated. If the pipeline is filled with flammable and explosive media, it is very dangerous. Therefore, a connecting device is installed in the valve to guide the static electricity of the ball to the outside to prevent static electricity. is very important,
